BNTKD - 600 INDUSTRIAL ENAMEL WHITE 17875
- MSDS: BNTKD
- Manufacturer: DAVLIN PAINT CO INC
- Product Name: 600 INDUSTRIAL ENAMEL WHITE 17875
- National Stock Number: 8010-00-664-4761
Product Identification
Product ID:600 INDUSTRIAL ENAMEL WHITE 17875
MSDS Date:02/15/1989
FSC:8010
NIIN:00-664-4761
MSDS Number: BNTKD
Responsible Party
BERKELEY, CA 94702
US
Emergency Phone: 510-848-2863
Info Phone: 510-848-2863
Preparer: PATRICIA SHAW
Cage: 3Z268
Contractor
Telephone: 510-848-2863
Cage: 3Z268
Ingredients
HYDROCARBON MIXTURE (VAPOR PRESSURE 2.0 MM HG @ 68F)
CAS: 64741-41-9
Fraction By Weight: 25%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
PETROLEUM HYDROCARBON (VAPOR PRESSURE 50.0 MM HG)
CAS: 8008-20-6
RTECS: OA5500000
OSHA PEL 500 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:STUDIES SHOW THAT MANY PETROLEUM
HYDROCARBONS/SYNTHETIC LUBRICANTS POSE POTENTIAL HUMAN HEALTH RISKS
(VARY PERSON-PERSON). MINIMIZE EXPOS TO LIQ/VAPORS/MISTS/FUMES.
CHRONIC EXPOS MAY CAUSE DAMAGE TO C ENTRAL NERV SYS/RESP
SYSTEM/LUNGS/EYES/SKIN/GASTROINTESTINAL TRACT/LIVER/SPLEEN AND
KIDNEYS.
Effects of Overexposure:INHAL: NASAL/RESP
IRRIT/DIZZINESS/WEAKNESS/FATIGUE/NAUSEA/HEADACHE. HIGH
CONC-POSSIBLE NARCOSIS. EYE: SEVERE IRRIT/TEARING/REDNESS/BLURRED
VISION. SKIN: MOD IRRIT/DEFATTING/DERMATITIS. INGEST: IRRIT O F
DIGESTIVE TRACT/SIGNS OF CENTRAL NERVSYS DEPRESS, ASPIR HAZARD.
MATL IN LUNGS FROM INGEST/VOMIT & CAUSE LUNG INFLAMM.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMATITIS AND NAUSEA.
First Aid
First Aid:EYE: FLUSH W/WTR FOR 15 MIN, LIFT LIDS. GET MED AID. SKIN:
RMV CONTAM CLOTHING/WASH THOROUGHLY W/SOAP & WTR. IF IRRIT
PERSISTS, SEE DR. INHAL: RMV VICTIM TO FRESH AIR. APPLY ARTIF
RESP/ADMIN OXYGEN IF NEEDED. CONSULT DR. INGEST: GIVE WATER/MILK
TO DRINK & PHONE FOR MED ADVICE. DO NOT MAKE PERSON VOMIT UNLESS
DIRECTED BY MED PERSONNEL. IF MED ADVICE UNOBTAINABLE, TAKE PERSON
TO NEAREST EMERG HOSP.
Fire Fighting
Flash Point Method:SCC
Flash Point:104F,40C
Lower Limits:0.7
Upper Limits:6.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE EXTINGUISHERS DESIGNED FOR NFPA FLAMM LIQ
FIRE. WTR MAY BE INEFFECT, BUT USE AS FOG FOR COOLING. FIRE
FIGHTERS/OTHERS EXPOS TO PROD OF COMBUSTION SHOULD*
Unusual Fire/Explosion Hazard:VAPORS FORM AN EXPLOS MIXTURE W/AIR BTWN
LWR/UPR EXPLOS LIMITS-CAN BE IGNITED BY MANY SOURCES. CLSD CNTNRS
MAY EXPLODE WHEN EXPOS TO EXTREME HEAT. ISOLATE FROM#
Accidental Release
Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL IGNITION SOURCES. VENTILATE THE AREA. PROVIDE APPROPRIATE
PROTECTIVE EQUIPMENT. DIKE AROUND THE SPILL AREA. COVER SPILL WITH
INERT ABSORBANT AND TRANSF ER USING NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:STORE BELOW 80F IN CLSD ORIGINAL
CNTNR. AVOID FLAME AND HIGH TEMPERATURES. DO NOT STORE NEAR
OXIDIZING AGENTS OR ACIDS. VAPOR HEAVIER THAN AIR-MAY##
Other Precautions:DO NOT INGEST. AVOID PROLONG/REPEATED INHAL OF HEATED
VAPORS/SPRAY MIST. KEEP FROM HEAT. GROUND ALL CONNECTIONS/CNTNRS,
ETC WHEN POURING/TRANSFERING TO MINIMIZE STATIC ELECTRICITY. USE
NON-SPARKING TO OLS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED EQUIP WHEN AIRBORN
EXPOSURE LIMITS (SEE SECT II) ARE EXCEEDED. CONSULT RESP MFR TO
DETERMINE APPROPRIATE EQUIP FOR GIVEN APPLICATION. HIGH AIRBORN
CONCENTRATIONS MAY REQUIRE US E OF SUPPLIED-AIR RESPIRATOR OR SCBA.
Ventilation:SUFFICIENT VENT TO CONTROL EXPOSURE LEVELS BELOW AIRBORN
EXPOSURE LIMITS (SEE SECT II). VENT EQUIP MUST BE EXPLOS PROOF.
Protective Gloves:CONSULT GLOVE MFR TO DETERMINE TYPE
Eye Protection:CHEM SAFETY GLASSES OR GOGGLES
Other Protective Equipment:WEAR IMPERMEABLE APRONS/PROTECTIVE CLOTHING
WHENEVER POSSIBLE TO PREVENT REPEATED/EXTENDED EXPOSURE OF SKIN.
THE USE
Work Hygienic Practices:AFTER USING, WASH BEFORE EATING, TOILETING OR
SMOKING.
Supplemental Safety and Health
##TRAVEL A CONSIDERABLE DISTANCE TO A SOURCE OF IGNITION AND FLASHBACK.
OF HEAD CAPS WHENEVER POSSIBLE IS STRONGLY
RECOMMENDED.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315 TO 335F
Vapor Density:> THAN AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT WATER SOLUBLE
Appearance and Odor:PIGMENTED LIQUID. SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HEAT OR IGNITION SOURCES.
*WEAR FULL PROTECTIVE CLOTHING AND BREATHING
APPARATUS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE AND/OR MONOXIDE, LOW MOLEULAR WEIGHT HYDROCARBONS AND
ORGANIC ACIDS.
Disposal
Waste Disposal Methods:KEEP OUT OF DRAINS, SEWERS AND WATERWAYS.
DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.